Mister Disagree

switch password recovery digunakan bila kite dapat 1 switch yg kite xtau password yg da di set pada switch 2.. tp pada masa sama kite xnak buang configuration2 lain yg jugak d set dlm config.text pada switch.. so password recovery akan wat kite by pass the password supaya kite boleh wat backup config.text ke config.old (actually boleh rename jd name ape2 pon) sebelum kite boot switch (akan delete file config.text) then reload balik file config.old ke config.text supaya kite boleh tulis ape2 configuration (ubah password)..


step 1. off switch
step 2. on switch but at the same time, push MODE button for a while

* note: output just like below will be display when u done step 2 correctly
system software:
flash_init
load_helper
boot
switch:

step 3: switch: flash_init
step 4: switch: flash_helper (*so the switch will recognize the following command)
step 5: switch: flash: or dir flash: (*to view file stored in flash)

* note: generally u will find config.text (configuration file which also contain current password conf)

step 6: switch: rename flash: config.text flash: config.old (*create backup file)
step 7: switch: boot
step 8: Enter "n" at the prompt to start the Setup program
* note: switch will directly enter the switch configuration

step 9: Switch>enable (*to enter user mode)
step 10: Switch#rename flash:config.old flash:config.text
step 11: Switch#copy flash:config.text system:running-config
Destination filename [running-config]?
Switch#
step 12: Switch#enable secret class
step 13: Switch#enable password class
step 14: Switch#end
step 15: Switch#write memory
step 16: Switch#reload

*da boleh gune switch dgn password yg kite da set disamping configuration lain dlm switch still remain the same..try la